Candidate's Name______________Rank________Unit________________

TASK 1: PREPARE THE DRAGON FOR FIRING

1. Placed the Dragon into operation and obtained a level sight picture within 1 minute.

a. Placed the round under arm.
b. Unsnapped the bipod retainer strap.
c. Pushed the bipod down and forward to release and eject the forward shock absorber and locked the forward bipod brace
d. Unlocked the bipod friction lock and extended the bipod legs then relocked the bipod friction lock
e. Lowered the round until the rear shock absorber rested on the ground. (Did not drop the round.)
f. Removed the lens cover and secured it on the Velcro strip on the front shock absorber of the tracker
g. Assumed a sitting firing position and placed the round on shoulder
h. Removed the electrical connector cover from the round
i. Removed the tracker from the carrying bag. (Did not lift the tracker using the shock absorber as a handle.)
j. Pulled the connector covers from the tracker and secured them on the Velcro strip on top of the forward shock absorber of the tracker.
k. Placed the tracker guide pins in the slots of the tracker bracket guide rails of the rounds
I. Slid the tracker firmly to the rear using both hands until the spring clip locks the guide pins in place
m. Removed and secured lens cover
n. Assumed firing position and placed round on shoulder
o. Looked through tracker and obtained correct sight picture.

NOTE: The scorer will ask the candidate what he would do if the reticle was tilted when he looked through the tracker ("Adjust the bipod friction lock and foot adjust to obtain a level sight picture")

CHECK: PASS______ FAIL______

REASON(S) FOR FAILURE

__________________________________________________

__________________________________________________

__________________________________________________

SCORER'S SIGNATURE________________DATE________________

Is this a retest? YES______NO______

RETURN TO EIB HOME PAGE